Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Bottles/Cages

$29.95
Be rad with the B-RAD System, the ultimate Bottle Relocation and Accessory Device. Mount your bottles away from inconvenient rear shocks, add storage room for tools or tubes below a bottle cage, and provide space for a second bottle on sufficiently long downtubes—all with one patented design. Our handy 1-1 template helps you determine which Base measurements match your frame and our selection of B-RAD Replacement Parts ensures you’ll never go without a particular feature or strap. Stay hydrated and prepared on every ride by carrying your essentials right where you need them! Half Bottle Adapter lets you offset the bottle cage location to make your bottle more accessible, and to fit additional accessories like a pump, tool, tube, etc. - Easy to access bottles and out of the way of legs - Easy to install using existing cage mounts on a bike (B-RAD Base component required; sold separately) - Use the DogBone base for curved downtube frames Great for trail, enduro, bike packing, XC, and town/commuting applications. The B-RAD Mini Strap and Accessory Mount were designed especially for the Half Bottle Adapter so it could be mounted to the side of the bottle. But you can customize it to fit your needs. Works great with modern trail bikes from companies like Pivot, Intense, and Santa Cruz or others with difficult bottle access. Tech Specs: - Material: 6061-T6 aluminum brackets - Weight: 18g - Maximum load: 1700g - Tools Needed: T25 Torx - Torque: 3-4 Nm - Made in the USA
$69.95
- The Wolf Tooth Morse Cage is a lightweight and low profile way to reposition bottle cages. - Named for its dot-dash-dot-dash mounting pattern, the Morse Cage base plate offers four positions across 32mm of vertical adjustment, fully capturing one mounting bolt in every position to prevent movement. - Can be bent back into shape if damaged, and is available in both titanium and stainless steel
$15.00
Everyone deserves a fresh, new water bottle now and then. This classy 22-oz. bottle from Whisky works great and is sure to make any bike a little fancier. - Purist technology shields the inside of the bottle from any bad taste, mold, or staining - Squeezable materials allow for unmatched flexibility and comfort
$25.00
Fancy up that bottle cage with a fresh new water bottle from Whisky Parts Co. This insulated 23-oz. bottle with a MoFlo cap makes instant refreshment possible! - Insulated for temperature optimization - Purist technology shields the inside of the bottle from any bad taste, mold, or staining - Squeezable materials allow for unmatched flexibility and comfort
$50.00
The No. 9 Side Entry Cage by Whisky Parts Co. melds convenience, form, function, and light weight. It's full-carbon design securely grips your bottle, and side entry cages allow access to your bottle on small frames or when using frame bags.
$60.00
- Whisky Carbon Water Bottle Cage - Cage Material: Carbon - Mount Type: Bolt-On - Weight: 28 grams (C3), 25 grams (C2), 30 grams (C1)
$24.70
With this new Trimax grip cage, you won’t need to worry about losing your bottle out on the road. You can take on any terrain and still find your bottle intact. It is also compatible with the Trimax Rear Hydration System. - Water bottle cage with greater stiffness to prevent unintentional bottle release - Reinforced ribs and sturdy bottom shelf for positive engagement and release - Universal bottle fitment - Fiber-reinforced Nylon body - 20mm of adjustability for the ideal mounting position
$88.90
- CFD refined integrated bottle with Bento box and computer mount - Articulated straw mount to allow precise angulation and unobtrusive fold-away - Forward computer mount with easy line-of-sight - Included Vision Drop Bottle System and Extension Mount - Metron TFE compatible with adaptor SIZES - 700ml FINISH - Matte black - Color graphics WEIGHT - 335 grams
$89.90
Made to fit any type of saddle, the Vision Trimax rear hydration system can suit any need. With the option to mount two extra high grip cages, no rider will go thirsty whether it’s in a race or riding with friends. - Modular saddle drink system universally fits both traditional and snub-nose saddles - Multiple mounting and lashing points can be customized for water bottles, CO2 pumps, accessory bags, and tie-strap combinations - 3-position (40 degrees) saddle rail mounting options - Bottle cages are mounted for optimized accessibility and ideal aerodynamics - 5-position (40 degrees) bottle cage tilt adjustability - Precision-made alloy frame with corrosion-resistant hardware - Includes Quiver Saddle Mount and two High Grip Cages
$25.00
These cages are based on an old French design from the '40s or early '50s. In our estimation, they are the best looking bottle cages of all time. The Retro is a regular one-handed cage; you insert the bottle just like in any other cage, but it holds the bottle very securely due to the spring-like shape. You can spread the cage for an oversized bottle, or squeeze the cage inward for a better fit with (for instance) a metal water bottle. Retro cages are made by hand from a single length of 3mm stainless steel rod and then electro-polished. If you examine it closely from all angles you'll see that it is, indeed, hand made. There are two versions of our cage. This is "Type II," with a tab on the back to hold smaller and regular plastic bottles securely. "Type I" has no tab, which is the traditional design and is the better option if you're using taller metal water bottles such as the 27oz Klean Kanteen.
$21.00
Turns your own bottle cage into a quick Cage so you can mount your bottle anywhere.
$28.50
Our vinyl-coated cage is specifically designed for holding the taller stainless steel bottles, without scratching or rattling. Its straight-back design allows the bottle to rest comfortably and securely in the cage. - Stainless steel cage with a black vinyl coating - Fits any size frame tube or seatpost with a Velcro strap - Will not scratch metal bottles or remove paint - TF-41 is capable of holding bottles up to 24oz - TF-42 is capable of holding standard Nalgene bottles - Made in the USA
$34.00
- Stainless steel cage with 24 ounce screw top bottle - Cage Velcros on any size frame tube or seat post
$34.95
The Quick Cage 3-bolt Adapter is made from high-impact nylon with stainless steel inserts and is designed to hold any 2 or 3-bolt cage, such as the Anything Cages by King Cage, Salsa, and Blackburn. Stuff sacks, sleeping rolls, tents, as well as extra-large water bottles are all game.
$37.00
Our vinyl-coated cage is specifically designed for holding the taller stainless steel bottles, without scratching or rattling. Its straight-back design allows the bottle to rest comfortably and securely in the cage. - Stainless steel cage with a black vinyl coating - Fits any size frame tube or seatpost with a Velcro strap - Will not scratch metal bottles or remove paint - TF-41 is capable of holding bottles up to 24oz - TF-42 is capable of holding standard Nalgene bottles - Made in the USA
$11.99 - $13.99
Voda Flow is a premium water bottle with great in-hand feel and a Flow Top cap that offers lockable easy-squeeze hydration. The No-Drop Grip Ring adds a texture for a confident grasp even when wet, and it's all wrapped up with long lasting graphics that stay looking fresh for miles to come. Recyclable, FDA-approved materials are free from BPA's and Phthalates. - A premium bottle that provides great in-hand feel and consistent leak-free closure - Flow Top cap's heart valve and soft-touch poppet offers easy-squeeze hydration - Secure threaded cap with easy open-and-close poppet locks down leaks - No-Drop Grip Ring provides a grippy texture for confident grasp even when wet - Designed for easy cage entry and removal with secure retention - Bottle and cap are dishwasher safe and recyclable - USDA approved and free of BPAs and phthalates - Manufactured in USA with long-lasting graphics that resist scratching
$14.99
A dependable water bottle capable of carrying 34 ounces of hydration for lasting refreshment on your longest rides - 34 ounces of hydration with great feel & consistent closure - Fits best on M to XL bikes. Side load cages are recommended for easy entry and removal. - Pop Top's soft thermoplastic poppet is easy to open and close - Bottle and cap are dishwasher safe and recyclable - USDA approved and free of BPAs and phthalates - Long-lasting graphics resist scratching for a look that lasts
$35.00
This stainless steel, insulated iteration of the well-loved Podium bottle keeps your hydration cold without holding you back. Keep your chill Tough enough to tackle any ride, the Podium® Steel is built for life on and off the road. Made from premium 18/8 stainless steel, this sleek bottle combines rugged durability with a streamlined design that's always close at hand but stays out of your way. The double-wall vacuum insulation keeps your beverages cold for your entire ride, and the lightweight construction strikes the perfect balance between agility and reliability. Product details: - Made with safer chemicals, designed to preserve resources and diminish disposables - Double-Wall Vacuum Insulation - Temperature defying chill - Lightweight Design - So lightweight you might forget it's there - Hours Cold - 18 hours - No Squeeze Required - Just grab, lift, and sip - 18/8 Stainless Steel - Tough as nails, but doesn't taste like them - High-Flow Cap - Logic-defying sipping ease - Leakproof Lockout - No spills, all thrills Features: Easy Drinking Stay focused on crushing your ride – not your bottle. Podium's high-flow cap means there's no squeezing necessary to get maximum hydration. Just grab, lift, and sip! Tired of plastic? Ditch your plastic water bottles for the CamelBak stainless steel and titanium bottles that are built to stand the test of time. Stainless steel vs. titanium Both bottles will be long-lasting and easy to clean, so which do you choose? Easy! The titanium bottles are lighter weight and the stainless steel bottles offer more durability while keeping your water colder for longer.
$40.00
This stainless steel, insulated iteration of the well-loved Podium bottle keeps your hydration cold without holding you back. Keep your chill When you're charging uphill, you need hydration that's close at hand but stays out of your way. The Podium® Steel 22oz is made from premium 18/8 stainless steel with a sleek design and expanded capacity so you can carry more water without ever slowing down. The double-wall vacuum insulation keeps your beverages cold for your entire ride, and the lightweight construction strikes the perfect balance between agility and reliability. Product details: - Made with safer chemicals, designed to preserve resources and diminish disposables - Double-Wall Vacuum Insulation - Temperature defying chill - Lightweight Design - So lightweight you might forget it's there - Hours Cold - 18 hours - No Squeeze Required - Just grab, lift, and sip - 18/8 Stainless Steel - Tough as nails, but doesn't taste like them - High-Flow Cap - Logic-defying sipping ease - Leakproof Lockout - No spills, all thrills Features: Easy Drinking Stay focused on crushing your ride – not your bottle. Podium's high-flow cap means there's no squeezing necessary to get maximum hydration. Just grab, lift, and sip! Tired of plastic? Ditch your plastic water bottles for the CamelBak stainless steel and titanium bottles that are built to stand the test of time. Stainless steel vs. titanium Both bottles will be long-lasting and easy to clean, so which do you choose? Easy! The titanium bottles are lighter weight and the stainless steel bottles offer more durability while keeping your water colder for longer.
$7.95
Topeak's Modula EX is a sleek, adjustable bottle cage that securely carries a wide range of bottles.
$14.95
Topeak's Modula II is a sleek bottle cage capable of handling bicycle water bottles and small mineral water or sports drink bottles. So go ahead and buy that sports drink! Now it will fit in your bottle cage.
$64.95
Made from Toray Japan T700 and T300 carbon fiber using a unique carbon flat lay-up process, the Shuttle Cage XE is an incredibly strong, ultralight, and affordable 3K carbon fiber bottle cage. With two stainless steel bolts included, it's ready to mount and enjoy on your ride. - Fits standard water bottle - Two stainless steel bolts included - Material: Torayca Japan T700 and T300 advanced carbon fiber - Size: 14 x 8.6 x 7.4cm / 5.5" x 3.4" x 2.9" - Weight: 22g / 0.78oz
$15.00
Add a touch of Teravail to your ride with these bottles. - BPA-free plastic - 100% FDA food-grade materials - Non-solvent base (UV cured) CPSC-approved ink - Volume: 22 oz
$7.99
The Tanaka R.A.M is a threaded accessory boss that you can mount to your suspension fork and most tubes on your bikes, - Simple but extremely effective accessory mount - Repositionable, mounts almost anywhere on the bike - Includes a small piece of Newbaum's cotton tape to protect the frame or fork finish - Two sizes: 28.6-35mm or 42-50mm - Sold individually, two are needed to mount a bottle cage
$7.99
The Tanaka R.A.M is a threaded accessory boss that you can mount to your suspension fork and most tubes on your bikes, - Simple but extremely effective accessory mount - Repositionable, mounts almost anywhere on the bike - Includes a small piece of Newbaum's cotton tape to protect the frame or fork finish - Two sizes: 28.6-35mm or 42-50mm - Sold individually, two are needed to mount a bottle cage
$21.59
- Copper finish matches premium leather saddles and MKS pedals - 4.5Mm aluminum rod with aluminum bolts - Made in japan
$21.99
Lightweight tubular stainless steel bottle cage. Stainless steel won't mark plastic bottles like aluminum cages do. - Bolts are not included. - Made in Japan. (The raw version may have imperfections and discoloration from weld heat)
$24.99
Stainless steel bottle cage made with extra stiff 6mm OD tubing. - Weight: 77g - Semi-polish finish - Made in Japan
$26.99
Stainless steel bottle cage made with extra stiff 6mm OD tubing. - Three sets of holes for multi-position mounting - Weight: 83g - Semi-polish finish - Made in Japan
$19.99
The Deva has proven its worth during the cycling classics over cobblestones. Its material and unique cylindrical shape ensure perfect clamping and prevent the bottle slowly working its way up. The cage is designed so that the bottle can be inserted easily and smoothly. And since it's produced in so many different colors, there is one available for everyone's bike.