Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Other

$17.39
- Adjustable direct rear mount kickstand - Mounts to 18-40mm kickstand tab - Fully adjustable length for 26" to 29" wheels - Self locking design - Alloy construction
$17.99
Nylon beaded cable ties - 8-inch - Reusable
$21.99 - $35.99
• Self locking rear mount design • Fully adjustable length for 26" to 29" wheels • Alloy construction
$21.99
- Chainstay-mounted adjustable kickstand - Adjusts to be compatible with 24" to 29" bikes - Large rubber/plastic boot provides a stable stand platform
$21.99
- Direct-mount adjustable kickstand - Direct mount attaches to the chainstay dropout - Adjusts to fit bikes from 24" to 29" - Large foot profile for increased stability
$24.99
• Rear mount • Fits 26" wheels
$36.99
• Aluminum double kickstand • Includes top plate • Not adjustable • 26-inch bicycle compatible
$39.99
• Aluminum double kickstand • Includes top plate • Adjustable for bikes from 24" to 700c
$12.00
We've always had a love-hate relationship with kickstands. When they work properly, they're great-a simple and easy way to leave your bike perched. But somehow, they always seem to fail when you least expect it, ending with a loud CRASH! and a scratched-up bike. So, we decided to develop a kickstand that does its job and does it well. And keep in mind, this kickstand was specifically designed for Rolls with 650b x 2.3" tires. - Specifically designed for Specialized Roll and its 650b x 2.3" tires. - Simple mounting takes the sting out of assembly. - Balances your bike flawlessly.
$34.99 $50.00 30% Off
This plug-in throttle mounts next to your HMI on your Globe bike and allows you to motor up to 20mph without needing to pedal. Need to go faster? Pedal assist will still be there to give you a boost to 28mph after the throttle reaches its limit. The throttle’s extra burst of torque makes entering and exiting traffic safer and faster but still allows you to use pedal assist to increase efficiency and range. - Designed for frictionless compatibility with the Globe Haul ST and Haul LT. - Max throttle speed: 20mph. Does not affect pedal-assist performance or top speed. - Requires installation of the free Globe phone app to activate.
$39.99
Turbo Chainstay-Mounted Kickstand - 323mm.
$21.95
Aluminum Direct Mount kickstands in KSA 18mm. These kickstands only work with bike frames designed for these kickstand standards. KSA 18 has two bolt holes 18mm apart. - 320mm long (Trim to optimize fit) - Black or Silver - Bolts included KSA 18 fits many Giant and Liv models: - Seek - 2013-2016 - Roam - 2013-2018+ - Rove - 2013-2018+ - Enchant - 2017+ - Escape Disc - 2017+ - BeLiv - 2018+ - BeLiv City - 2018+ - ATX - 2018+ - ARX - 2018+ - FastRoad 2017 - AnyRoad Adv - 2018+ - Talon- 2018+ - Alight- 2018+ - Tempt- 2018+ - Thrive- 2018+ - Sedona DX- 2018+ (Does NOT fit Sedona or Sedona W)
$21.95
Aluminum Direct Mount kickstands in KSA 40mm. These kickstands only work with bike frames designed for these kickstand standards. KSA 40 has two bolt holes 40mm apart. This particular KSA 40 design mounts inboard of the chainstay, not outboard.
$39.99
An aluminum kickstand that mounts just to the chainstay (instead of bridging the seatstay and chainstay). Try it on bikes that have disc brakes. Not recommended for carbon fiber chainstays.
$59.99
Heavy duty aluminum double kickstand with 28mm-36mm adjustable length (from bottom plate vertically). Legs fold up to one side. Strong enough for cargo bikes and some e-bikes. Weight is approx 860g.
$20.00
Show Salsa pride and add some flare with these stickers. - Slap a sticker on your helmet, bike, or whatever you choose
$2.50
Replacement sliding bridge clip for Chromoplastic Longboard and Commuter II fenders. The replacement clips are made of aluminum with an adjustable bottom so they can be clamped onto the fender. - The 35mm clip works with 35mm fenders. - The 45mm clip works with 45mm fenders. - The 55mm clip works with 50-55mm fenders. - The 65mm clip works with 65mm fenders.
$6.99
Cannondale Headshok Adaptor for the SKS Shockboard Fender
$6.99
Fork Adapter for Suntour/RockShox Offset allows full fender or Velo fender stays to be mounted to the Suntour, RockShox, or other forks with unique mounting systems.
$6.99
Fork Adapter for Suntour/RockShox Straight allows full fender or Velo fender stays to be mounted to the Suntour, RockShox, or other forks with unique mounting systems.
$8.99
Replacement SKS Rubber Straps for RacebladePro and S-Board
$12.99 - $14.99
Eyebolt and Nut Set for mounting V-Stays to the Bluemels Fenders. Contains 8 stainless eyebolts, 8 stainless nuts and 8 plastic stay endcaps. The set is available in either black or silver finish. This hardware set is included with the fenders, this kit is available as a replacement. - Made in Germany - 11890 Nuts and bolts are black finish - 11891 Nuts and bolts are silver finish
$12.99
For mounting the wheel guard in the steerer tube The cone system from SKS GERMANY has proven itself for over 20 years. After an update, the SKS SHOCKBLADE and SHOCKBOARD mudguards can now also be securely attached to larger fork shafts. The system covers a diameter of up to 39 mm (1.8 inches) and is made of very robust, glass-fiber-reinforced plastic. In addition to the simple assembly, the new cone system convinces with well thought out fastening components for an optimal fit.
$13.99
This eyebolt and nut set for fender-mounting contains 8 stainless eyebolts, 8 stainless nuts, and 8 plastic stay endcaps. This hardware set is used for mounting Chromoplastic Longboards, Bluemels, and Commuter II Fenders.
$15.99
Bridge and mounting bracket for the VeloFlexx 55 and 65 Fenders
$20.99
Front and Rear SKS V-Brace Fender Stay Set with Drawbolts
$27.99
Stay Kit for Bluemels STYLE Fenders includes 4 black powder-coated U-Stays + ESC V-Adapter Strut Mount Set (11892). Made in Germany. 11905-Set for Bluemels STYLE 46mm Width Profile (item 11832) 11909-Set for Bluemels STYLE 56mm Width Profile (item 11835) 11913-Set for Bluemels STYLE 65mm Width Profile (item 11838) 11915-Set for Bluemels STYLE 75mm Width Profile (item 11841)
$29.99
Stay Kit for Bluemels 26"/28" Fenders includes 4 V-Stays with ASR Safety Release for Front + Eyebolt and Nut Set. Made in Germany. 11897-Set for Bluemels 26"/28" with Black Stays & Hardware (for 11805, 11806, 11807, 11811, 11815, 11819 and 11823) 11898-Set for Bluemels 26"/28" with Silver Stays & Hardware (for 11808, 11812, 11816, 11820 and 11824)
$20.00
Protect your chainstay and other wear areas from harsh chainslap and other frame damage maintaining your bike's strength and beauty. The rubberized strip is 50mm wide and each roll is 1000mm long. Wrap up the stay or trim a custom shape to protect the frame. RideWrap protection accessories are made with high-quality RideWrap materials that are bike-tested for long-term durability. All RideWrap protection accessories have been designed to give riders leading protection for their dollar. - Matte black finish - Fits all makes, models, and sizes - Protects from harsh chainslap and other damage - 50mm x 1000mm roll - Designed around mountain bike geometry - Kit includes instructions and pre-install cleaning wipe