Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Seatposts

Thomson Masterpiece Seatpost
$149.95
The name says it all: Thomson's Masterpiece Seatpost combines the best materials, exceptional strength, perfect function, light weight and the classic beauty of all Thomson products. All Masterpiece posts are extruded and then painstakingly machined from a single block of ultra-strong 7000-series aluminum, and they all weigh less than 200 grams complete. This means you get a post tough enough for any ride on or off road and at a nice and light weight that will complement your dream bike. What's more, you get Thomson's easy-to-adjust and super reliable 2-bolt seat clamp that makes it a breeze to dial in your perfect seat position from minus 5 degrees to plus 29 degrees.
Sunlite Alloy 350mm Seatpost
$19.99
• Forged aluminum • Integrated micro-adjust seat clamp
Sunlite Alloy 350mm Pillar Seatpost
$12.99
- Forged aluminum - 7/8-inch seat-clamp diameter - 165 grams
Sunlite Unicycle 4-Bolt Seatpost
$12.99 - $15.99
• Unicycle-specific seatpost
Race Face Chester Seatpost
$34.99
The Chester seatpost from Race Face is a durable, no-nonsense post that can take on rock gardens and plenty of rough landings while still leaving bills in your pocket for aprés ride festivities. Features • Seat tube drawn from 6061 Alloy • Proven dual bolt, multi-adjustable head design. • Shot peened for high impact strength & fatigue resistance.
Thomson Elite Dropper Seatpost
$449.95 - $479.95
Keep the flow going with Thomson's Elite Dropper Seatpost, a post good enough to wear the Thomson badge. This exquisite bicycle upgrade is made of tough and light 7000 series aluminum and boasts Thomson's trademark engineering and reliability with custom, best-of-the-best O-rings, bushings, and oil. Thomson's remote handlebar lever is included. It's one of the smallest, most-ergonomic ones available and it has a short throw for quick height changes to move your saddle smoothly through 5 inches of infinite travel (damped in the last 15mm for a forgiving action). Plus, the classic Thomson seat clamp allows quick and easy seat adjustments and keeps your saddle in place.
KS Ether Carbon Seatpost
$165.13
- Gravity-approved butted unidirectional carbon mast with black on black graphics - Uses the same two-bolt seat clamp found on the LEV, featuring titanium bolts - 188g (30.9mm)
TruVativ AKA Seatpost
$64.00
Adventurous trail and all-mountain riding requires absolutely dependable components, and that’s where TruVativ's AKA Seatpost comes in. Made with a 7050 forged alloy shaft and an easy-to-adjust dual bolt head design, AKA is tough enough to get you where you are going. And, at 270 grams, it’s light enough to get you there a little faster.
Thomson Elite Setback Seatpost
$99.95
Thomson's Elite Setback Seatpost is perhaps one of the most recognizable bicycle components in the world and it has earned its reputation as a super-strong, light and reliable beauty. With roots in the aerospace industry, Thomson builds the post with a tough and light 7000-series aluminum body, an elliptical extrusion that adds strength and stiffness, and a head and seat clamp forged and machined from a block of aluminum to eliminate any possible weak areas. Plus, its simple-to-use 2-bolt seat clamp allows speedy, infinite and secure seat angle adjustment from minus 5 degrees to plus 29 degrees. Upgrade your favorite ride to a Thomson seatpost and start riding in style.
Thomson Elite Covert Dropper Seatpost
$479.95
Keep the flow going with Thomson's Elite Covert Dropper Seatpost, a post good enough to wear the Thomson badge. This exquisite bicycle upgrade is made of tough and light 7000 series aluminum and its cable attaches to the very bottom and uses your bike's internal cable routing to keep your frame nice and clean. Of course, the Elite features Thomson's trademark engineering and reliability with custom, best-of-the-best O-rings, bushings, and oil. Thomson's remote handlebar lever is included. It's one of the smallest, most-ergonomic ones available and it has a short throw for quick height changes to move your saddle smoothly through 5 inches of infinite travel (damped in the last 15mm for a forgiving action). Plus, the classic Thomson seat clamp allows quick and easy seat adjustments and keeps your saddle in place.
Syntace P6 Carbon HiFlex Seatpost
$224.10
Syntace's HiFlex full carbon seatpost is centered around a highly technical carbon design that evenly distributes rider load as well as damps vibrations without loss of control. Its extra-deep 52mm bottom clamp offers optimal rail support while a shallow 30mm top clamp allows for extra fore-aft adjustment. The two-bolt micro adjust clamp offers precise saddle angle adjustments and features bolts arranged in line with the direction of bump forces for increased strength Ideal for anything from road to mountain. - Improved vibration damping and directional stability - Bob-damping mechanism for full suspension bikes - Compatible with most Carbon rails - Weight: 212g - Max. Height: 310mm - Min. Height: 40mm
FSA SL-K Seatpost
$90.99
FSA's SL-K Seatpost is lighter and stiffer than ever! Using a UD carbon shaft with a bonded alloy head and a sophisticated MTC clamp design, FSA has achieved what they believe is the finest seat post yet. - UD Carbon shaft, 2-bolt SBS alloy head, and chromoly hardware - Min. Height: 40mm - SB0 = 0mm offset - SB20 = 20mm offset
e*thirteen by The Hive TRS+ Dropper Seatpost
$279.00
The TRS+ from e*thirteen is a fully mechanical dropper post focused on reliability, simplicity, and durability. This is a coil spring post with pre-set mechanical stops along it's travel range. No bleeding, no loss of air pressure or depleted nitrogen charge. And, your saddle position is rock solid, locked into place with a heat-treated cam instead of a hydraulic mechanism. The internally routed cable is controlled by a left, shifter-style lever that is best suited to 1x drivetrains. - 4 pre-set travel positions - Shifter-style remote is SRAM MatchMaker compatible, fully weather sealed, and uses a cartridge bearing at the lever pivot - Shop-serviceable with common tools: No oil or air pressure needed - Cable head is at the bottom of the post, clamped at the remote for easier removal during maintenance or shipping - Double bolt clamp: fits both standard and 7 x 9mm carbon rails - 5-Year warranty
Dimension Two-Bolt Seatpost
$24.99
Dimension Two-Bolt Seatposts provide a sturdy and durable saddle perch for cross country and all-mountain riding in three diameters, rigorously tested to ISO 4210 Mountain standards. - Constructed with AL-6061-T6 aluminum - Shot-peened finish - 0mm offset
Origin8 Spire I Seatpost
$44.20
3D forged one-piece AL7050-T6 construction - Wide saddle clamp design reduces rail stress and flex - Micro-adjust 2 bolt clamp design - 15mm setback - ISO-Mountain safety certified
Velo Orange Grand Cru Seatpost
$55.00
The Velo Orange Grand Cru seatpost is made from one piece of aluminum, internally ovalized to trim weight. The Grand Cru seatpost’s head is integral with the post – not pressed on – for great strength and weight savings. 0mm Setback: Zero-setback/offset posts are commonly used on mountain bikes and by some bikepackers. The Grand Cru zero setback post uses a one-bolt, ergonomic side-adjustment mechanism for both saddle rail clamping and fore-aft adjustment. 30.2mm Setback: For riders who prefer the comfort of leather saddles but have found proper saddle placement difficult due the short rails on leather saddles Velo Orange offers the Grand Cru Long Setback with an ample 30.2mm of setback. This model uses a two-bolt design.
Race Face Turbine R Dropper Seatpost
$294.99
The Turbine R dropper brings you the function and reliability you deserve with Race Face aesthetics to complete your build. - Built by Fox using the same chassis and internals as the Fox Transfer post - Features faster rebound than Fox Transfer - Cable actuated with tool-free quick disconnect for easier installation and removal - Low lever force provides consistent actuation pressure even with saddle weighted or unweighted - Easy to modulate return speed with lever - Race Face 1x Lever or Universal Lever compatible - Matchmaker compatible - Remote sold separately
Easton EA90
$99.99
Our new EA90 seatpost applies our patent pending ISA saddle adjustment allowing for independent seat angle and fore-aft movement, helping you refine your positioning without needing to undo your rail clamps for each minute tweak. Saddle angle is then locked in place so you have the confidence your saddle will stay put after you find your fit. - Finish: Black anodized - Weight: Zero, 295g; Setback, 268g - Head offset: 0mm, 20mm - Length: 350mm w/ 80mm min. insert - Quill size: 27.2mm - Material: EA90 alloy
RockShox Reverb AXS
$800.00
Our intention with Reverb AXS was inventive and pure: No hoses. No routing. No energy wasted. Not a single thing in the way of the experience. We created a reliable wireless-electronic dropper post and controller that actuates with drastically less effort and zero distraction. Expanding what's possible on a bike, Reverb AXS is enabled by SRAM AXS technology, a new level of interaction, personalization, and connectivity across all AXS-enabled components. - Effortless Electronic-Wireless actuation and infinite height adjustment with a single touch. - Clean, simple and fast to install. No hoses to route, no fishing required. - Updated internals for faster return speed in all conditions. - New Vent Valve Technology, a simple and reliable built in service solution without disassembly of the seatpost. - SRAM AXS technology, a new level of interaction, personalization, and connectivity across all AXS-enabled components. - Includes RockShox AXS handlebar controller, rechargeable SRAM battery, and charger.
TruVativ Stylo T40 Seatpost
$82.00
TruVativ's lightweight Stylo T40 Seatpost is constructed with a 1-piece 3D-forged 7050 aluminum tube to be light and strong. The sturdy dual-bolt head features titanium bolts and provides loads of adjustability so you can fine tune your saddle position.
WeThePeople Team Pivotal Seatpost
$26.99
WeThePeople's Team Pivotal seatpost is made from 6061 aluminum for a perfect blend of strength and weight savings. It works with all Pivotal seats and it's 200mm long for plenty of adjustability.
TruVativ Holzfeller Seatpost
$61.00
There are a few things that matter most in a downhill/freeride seatpost: strength, durability and adjustability. TruVativ's Holzfeller, made with a tough 3D forged 7050 aluminum shaft and a wide range of adjustment options, has you covered in all these areas — plus stylish graphics set it apart from the crowd. It features a two-bolt clamp with a wide range of tilt adjustments, so whatever terrain you ride, and whatever the seat tube angle on your bike, you can dial in Holzfeller for the ideal performance and fit.
Gravity Light Seatpost
$74.99
Gravity's Light Seatpost is light enough for your XC rig, but strong enough for freeride. Quad-butted aluminum and zero setback provide maximum strength-to-weight. The forged mast and seat clamp keep a firm grip on your saddle and the burly chromoly hardware makes adjustments easy.
Salsa Guide Carbon Seatpost
$95.00
The Salsa Guide Carbon Seatpost is lightweight, durable, and supportive when you need it most. - Carbon shaft - Bonded Aluminum two-bolt head
Gusset Lofty XXL Seatpost
$39.95
- Extra long forged 6061 aluminum post allowing maximum height adjustment - 2-bolt micro-adjust clamp - 450mm long - 345g @ 27.2mm
Origin8 Pro Fit Alloy Seat Post
$32.95 - $33.70
Origin-8's Pro Fit Alloy Seat Post is made of light and durable forged aluminum that's been anodized and laser etched for a custom look. It also features an adjustable 2-bolt clamp that holds fast and lets you easily dial in your seat position. And, this fine post comes in a variety of diameters to fit almost any bike.
Problem Solvers Seatpost Shims
$9.99
Switching frames doesn’t mean you have to switch posts! Use your old posts without worry with Problem Solver's wide variety of seatpost shims. -100mm long -3mm lip -Alloy Problem Solvers Seatpost Shims are not intended for use with carbon seatposts
Gusset Pivotal Alloy Seatpost
$35.95
- A strong, lightweight alloy post, licensed from Pivotal BMX Inc. - Allows seat to be dropped lower than conventional posts - 3D forged 7075 alloy post with internal oval construction for strength - 10mm bolt tightening system, accessed through a slot in Pivotal Seat top (seat sold separately) - 100g (24.5mm) / 258g (27.2mm)
Race Face Aeffect Dropper Post
$180.00 - $220.00
Introducing the Aeffect Dropper Post. A budget friendly but rock solid option for riders wanting to enter the dropper market. A sealed damping system wrapped in 7075 aluminium makes for a lightweight dropper that can take the hits. Internal cable routing compatible for modern frame design and available in the two most popular drop measurements, it's easy to swap out your standard post and upgrade your ride. - Cable actuated, hydraulic cartridge - Infinite adjust within travel - Return speed adjustable (150mm only) - Same 2 bolt clamp system as Ride and Chester posts - Ergonomic 1x lever sold separately - Compatible with the Turbine universal and 1x levers - Standard shifter cable and housing
Salsa Guide Deluxe Alloy Seatpost
$65.00
The Salsa Guide Deluxe Seatpost is premium aluminum: lightweight, strong, and drama-free. Count on it to be there when you need it. - 2014 Aluminum shaft - Two-bolt head