Filter By:
- Bar Ends (19)
- BMX (72)
- Bottom Brackets (276)
- Brakes/Levers/Pads (795)
- Cables (267)
- Cassettes/Freewheels (183)
- Chainrings (336)
- Chains (171)
- Show More Categories
- Cranksets (370)
- Derailleurs (212)
- Forks (190)
- Groups (23)
- Handlebar Grips/Tape (420)
- Handlebars (426)
- Headsets (227)
- Pedals (437)
- Saddles (463)
- Seatposts (166)
- Shift/Brake Combinations (88)
- Shifters (143)
- Shocks (42)
- Stems (212)
- Other (2231)
- Show Fewer Categories
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Parts
$80.00
The Flash is iSSi's minimalist take on the traditional two-sided clipless pedal. It performs as well on the trail as it does on the commute.
- Bushing / Sealed bearing spindle, 52.5mm
- Models with longer spindles available in BlackOut
- SPD-compatible cleats and mounting hardware included
$100.00
The Flash is iSSi's minimalist take on the traditional two-sided clipless pedal. It performs as well on the trail as it does on the commute. Three sealed cartridge bearings make the Flash III iSSi’s smoothest rolling, most durable, lightest clipless pedals with multiple spindle length options.
- Spindle Type: Flip III: Triple Bearing
- Smooth-rolling at an affordable pricepoint
- SPD-compatible cleats and mounting hardware included
$70.00 - $80.00
There’s no need to choose between clipless performance and platform versatility with iSSi's Flip II pedals. Go clipless on the commute or sport clogs on campus.
- Flip II: 56.5mm spindle length
- Wear 2-bolt style cycling shoes or casual flat shoes
- Compatible with iSSi, Shimano SPD, and Wellgo 98A cleats
- Chromoly spindle, ED-coated
- Standard 15mm wrench flats as well as 8mm hex broach
- Black chrome hardware
- Adjustable spring tension
- 4° cleat float
- 14.6° angle of release
- Bushing/sealed bearing combination for low-maintenance durability
- Pedal Body Material: Aluminum
- Pedal Spindle: 9/16-inch
$100.00
The iSSi Road Carbon Pedals provide large platforms for excellent power transfer and stability. Bushing and sealed cartridge bearings add durability, while the Chromoly spindles resist corrosion for long life.
- Simple installation with a 8mm hex key
- Stainless Steel cleat plate provides a solid pedal interface
- Adjustable spring tension
- 7° float, 3-bolt split-cleat included
- Cleat Interface: Look KeO
- Material: Carbon
- Pedal Body Material: Aluminum
- Pedal Spindle: 9/16-inch
- Pedal Type: Single-Sided Clipless
- Spindle Material: Chromoly steel
- Weight: 266 grams
$100.00 - $105.00
iSSi's Trail Pedals offer bold styling, reliable technology, and a wide platform for better contact while in and out of the pedal. The Trail platform disperses pressure on your foot and provides a little extra confidence when descending unclipped. Dual-sided entry makes these SPD-compatible pedals simple to get into, while easily adjustable entry/release tension is perfect for beginners and experts alike. Plus, four degrees of float helps your knees track naturally during every crank revolution.
$100.00
iSSi's Trail Pedals offer bold styling, reliable technology, and a wide platform for better contact while in and out of the pedal. The Trail platform disperses pressure on your foot and provides a little extra confidence when descending unclipped. Dual-sided entry makes these SPD-compatible pedals simple to get into, while easily adjustable entry/release tension is perfect for beginners and experts alike. With triple-sealed cartridge bearings and durable chromoly spindles, these pedals will spin smoothly for countless rides. Plus, four degrees of float helps your knees track naturally during every crank revolution.
$51.99
absoluteBLACK Premium Round 110 BCD Road Chainrings utilize absoluteBLACK's top-tier design features. They are designed for new and old Shimano 4-arm cranks, such as Dura-Ace 9100, 9000, Ultegra 8000, 6800 & 105 R7000, and more. Optimized with smooth shifting in mind, premium chainrings have a 6-point ramp and recess design. Chainrings are crafted from CNC machined 7075 aluminum and feature an anodized finish for exceptional durability.
- Chainring BCD: 110 Shimano Asymmetric
- Rings provide exceptional stiffness due to thicker, 5mm construction
- Provides excellent weight-to-strength ratio
- 10, 11, and 12-speed compatible
- If only switching the inner chainring, use all original crank bolts
$30.00
Zipp's Service Course Cyclocross Bar Tape boasts extra padding for excellent cushioning and an exceptional grip. This classy wrap is embossed with logos for a custom look and includes end plugs and finishing-tape strips.
$30.00
Xpedo XPR cleat set for R-FORCE 6 is an SPD style cleat specifically designed for 3-hole road shoes.
- Weight: 135g per set with hardware
- Float: 6°
$199.99
The X-Fusion Manic post uses internal cable routing and was designed around a low-profile seat cradle and seal collar to fit a broad range of frames. The mechanism is air-sprung and hydraulically locked. The remote can be run on the left or right, above or below the handlebar, but is optimized as a left shifter replacement for 1x drivetrains.
- Cable activated, hydraulic action, infinitely adjustable travel
- Double key-way design prevents lateral twisting
- Double bolt clamp with a wide range of seat angle adjustment. Fits both standard and 7 x 9 mm Carbon Rails
- Sealed cartridge internals for quick replacement
- Low profile head-seal and saddle clamp increase useable travel
$79.95 - $89.95
Wolf Tooth was first to market with Cyclocross 1x specific chainrings because we saw Cyclocross as the perfect use for our Drop-Stop® technology. Since their release, the uses for these rings has expanded beyond Cyclocross to commuting, gravel riding, mountain bikes with 5-arm crank power meters, and even full on-road applications with the giant 50t rings.
Fits 110 BCD 5 arm cranksets
Drop-Stop technology. On Wolf Tooth’s patented wide/narrow chainring, the wide side of the tooth has maximum contact on the drive side which spreads the load and improves chainring life. The narrow side allows clearance for mud and debris which reduces friction.
Alternating wide/narrow tooth pattern prevents chain derailment
Compatibility:
- These rings are for use with 110 BCD 5-arm cranksets.
- Stock 2x bolts will not work. You will need bolts like our 6mm bolts which are optimized for single ring mounting.
- Chainline - varies - these rings can be mounted in either the big or small ring position on a double cranksets. The most common mounting is in the big ring position because of chainstay clearance. The ring centerline is ~2mm from the ring's mounting face so they usually sit about 2mm closer to the frame than the stock big ring (depends on the stock ring)
Recommendations
- Recommend the use of a clutch-style rear derailleur for the best chain security.
- If you plan to ride in very muddy conditions, we recommend a chainguide or chainkeeper in addition to a clutch-type rear derailleur! - Without these precautions, you may experience chaindrops and/or chainsuck.
Tech Specs:
- Weight: 34t/44g | 36t/58g | 38t/66g | 40t/74g | 42t/81g | 44t/90g | 46t/107g | 48t/115g | 50t/125g
- Material: 7075-T6 aluminum
- Made in the USA
$76.95 - $79.95
"More power, better traction, less shifting. Wolf Tooth oval chainrings use our proprietary PowerTrac design that has all the benefits of oval, but without the funky, uneven pedal stroke. Ride one once and you’ll wonder why you waited so long to try oval.
Think of an oval chainring as two chainrings in one. A major benefit of oval is how the shape of the chainring alters your gearing in two important phases of your pedal stroke by harnessing your body’s natural biomechanics. Here’s how it works. The area of the chainring with the larger diameter engages with the chain at the optimal point on the downstroke, which is what’s known as the Power Zone. If you were to look at a clock, the Power Zone would be between 1-5 and 7-11. Conversely, the Recovery Zone – back to the clock face, between 11-1 and 5-7 – is the weakest part of the pedal stroke, when the oval maximizes your efficiency. A 34T oval chainring behaves like a 36T chainring when you want power, while behaving like a 32T chainring when you’re climbing.
We’ve also engineered our oval chainrings to provide smoother, more efficient pedal rotation. This equates to better traction because of steadier torque on the rear wheel. With a Wolf Tooth oval chainring, you can harness more of your strength in the Power Zone, while having easier pedaling in the Recovery Zone.
These chainrings are for Race Face Cinch cranks such as Turbine, Next SL, Sixc & Aeffect. The Wolf Tooth Cinch chainrings feature our patented Drop-Stop® tooth profiles for the best wear life, chain retention and mud clearance. We have optimized tooth profiles for SRAM T-Type Transmission, Shimano Hyperglide+, and all 12, 11, 10, and 9-speed chains.
Compatibility
- Any Race Face Cinch™ system crankset (including Next SL, Sixc, Turbine, Aeffect)
- Riders running SRAM Transmission w/ Race Face Cinch cranksets with a Boost 136/137mm spindle use a Cinch direct mount 0mm offset chainring.
- Riders using a Cinch crankset with a Super Boost 151mm spindle use a Cinch direct mount 3mm offset chainring.
- Standard (142mm rear hub spacing) 6mm offset, Boost (148mm hub spacing) 3mm offset, and Boost for T-Type Transmission 55mm chainline 0mm offset are available.
- Use a 3mm offset chainring for Super Boost applications running standard drivetrains or Transmission.
- Wolf Tooth’s patented Drop-Stop® wide/narrow tooth profile for the ultimate chain retention and mud shedding ability.
- For 1x9, 1x10, 1x11 and 1x12 drivetrains (including SRAM Eagle)
--- If using a 9-speed drivetrain use a 10-speed chain (shifts and works well on a 9-speed drivetrain and fits the ring tighter for better chain retention).
- Maximum diameter is that of a chainring 2t bigger than the size you order (so be sure there is adequate chainstay clearance!)
- Chainline 49mm (standard), 52mm (Boost), 55mm (T-Type Boost)
- Available in multiple tooth profiles for optimal performance based on your chain type. Use Drop-Stop ST for use with Shimano 12-speed Hyperglide+ and 12spd KMC chains. Use Drop-Stop A for all 9, 10, and 11spd chains or 12spd SRAM Eagle, KMC, Connex or Wippermann chains. Drop-Stop B is optimized for SRAM 12 spd Transmission (T-type) and Road Flattop chains but is compatible with all chains that work with Drop-Stop A.
Recommendations
- If you plan to ride in very muddy conditions, we recommend a chainguide or chainkeeper in addition to a clutch-type rear derailleur! Without these precautions, you may experience chaindrops and/or chainsuck."
$21.95
Slightly thicker than the Razer Grips, slightly thinner than the Fat Paw Grips, these 6.5mm thick grips are great for longer rides, as they reduce hand fatigue and finger numbness.
- 100% proprietary dual-density silicone compound provides excellent vibration damping and conforms to your hand for improved comfort while maintaining durability
- Tacky texture provides excellent grip with or without gloves in all weather conditions
- 6.5mm thick
$29.95
ShiftMounts are adapter mounts that allow you to integrate SRAM and Shimano shifters with several different brakes from Shimano, SRAM, and Magura, or mount shifters directly to handlebars independent of brakes. Handlebar space is prime real estate and the ShiftMount seamlessly integrates brakes and shifters for a clean look.
- MM-ISEV is for a SRAM MatchMaker shifter mounting to a Shimano I-SPEC EV brake
- Designed to work with rear (right side) brakes and shifters.
- Consult the brake and shifter manufacturers to understand which mounting interface you have on your brakes and shifters.
- MM-ISEV is compatible with M9100, M9120, M8100, and M7100 Brakes. Deore M6100 or M4100 brakes will mount but the positioning is not optimal so we would consider them not compatible.
- MM-ISEV, MM-ISII, & MM-MAG: while they will technically mount to a Sram AXS shifter pod, we do not recommend it. With SRAM AXS, the shift lever will be further towards the end of the bar, or closer to the rider's hand than is ideal for most riders.
- Shimano I-SPEC A, Hope, and TRP brakes are not supported.
- Shimano I-SPEC EV to Magura brakes is not supported because of geometric challenges.
- ISII- 22 Clamp is compatible with Shimano XT M8000 and XTR M9000 shifters.
- NOT compatible with Shimano SLX M7000, Deore M6000.
- For handlebar clamp ShiftMounts tighten clamp bolt to 1-2 Nm max torque.
$69.99 - $99.95
Connex S0 chains are made of high strength alloy steel. Their chamfered plate design offer precise, lightning-fast shifting, ideal for both road and MTB riding.
- Alloy steel inner and outer link plates
- Compatible with Shimano, SRAM and Campagnolo 10 speed drive trains
- 5.9mm pin width
- Reusable Connex master link included
Connex sX chains are nickel plated for durability. Their chamfered plate design offer precise, lightning-fast shifting, ideal for both road and MTB riding.
- Stainless steel inner links, alloy steel outer links, both electroless nickel-plated
- Compatible with Shimano, SRAM and Campagnolo 10 speed drive trains
- 5.9mm pin width
- Reusable Connex master link included
$565.00
The Whisky No.9 MCX “monster cross” fork brings extra-wide tires to your drop-bar bike. How wide? The MCX accommodates tires up to 700c x 51mm or 650b x 61mm (that’s 2.4-inches). A relatively short 415mm axle-to-crown minimizes the geometry effects of a larger fork, and a 51mm offset improves toe clearance with large tires or fenders. The design draws from our CX forks, with lightweight carbon construction, a 12mm thru axle, and flat-mount brakes. Three-Pack mounts, dynamo cable routing, and fender mounts (700c x 45mm tire clearance with fender) add versatility for bikepackers and gravel riders.
- 12 x 100mm thru-axle
- Designed for flat mount disc brakes
- Hidden, removable fender mounts
- 700c x 51mm or 650b x 61 mm max tire size
- ASTM Condition 2 - For off-road riding and jumps less than 12-inches
- Includes thru axle and Whisky Parts Co. compression plug
$16.99
Shims for fitting 25.4mm diameter handlebars to 31.8mm clamp diameter stems. - Outside Diameter: 31.8mm - Inside Diameter: 25.4mm - Length: 48mm - Machined Aluminum - Anodized Black
$15.95
Shims for fitting 26.0mm diameter handlebars to 31.8mm clamp diameter stems. - Outside Diameter: 31.8mm - Inside Diameter: 26.0mm - Length: 44mm - Machined Aluminum - Anodized Black
$68.99
The Wheels Manufacturing 386 EVO Adaptor for Shimano Hollowtech II Cranks adapts Shimano cranks to 386EVO-standard frames. Simply tap the adapters into the 6806 bearing in the BB shell or cups, then install the cranks using the included spacers to adjust chainline, or to take up any side-to-side movement in the crank. - Machined engineering-grade Delrin - 48g/pr Includes - (2) - 24mm ID adapters - (8 )- .7mm spacers
$153.99
Thread-together BB for 386EVO frames and 22/24mm diameter spindle cranks. Machined aluminum cups thread together for stability, increased bearing life, and simple installation and maintenance. Enjoy smooth operation, fast bearing replacement, and no more creaking. - Drive Side Bearing: Enduro Angular Contact - Non-Drive Side Bearing: Enduro ABEC-3 - Color: Black - Bottom Bracket/Frame Interface: BB386EVO, BB392EVO - Bottom Bracket Shell Width (mm): 86mm – 92mm - Bottom Bracket Shell I.D.: 46mm - Crank Spindle Diameter: 22/24mm stepped - Over Bearing Width: 91.8mm in 86.5mm wide shell (dimensions include supplied silicone dust shields) - Weight: 145g
$25.50
Precision-machined 5mm ID brass cable ferrules for improved braking performance. A flat bottom on the inside prevents housing from pulling through ferrules. For use with most brake cables.
- Inside diameter: 5mm
- Outside diameter: 5.75mm
- Overall length: 12.7mm
- Material: brass
- Bottle of 50pcs
$20.95
- Allows the use of a 7 speed shimano cassette on an 8 or 9 speed shimano cassette body
$125.99
Wheels Mfg BB86/92 thread together bottom bracket for use with 24mm spindle diameter cranksets. The two machined aluminum cups thread together ensuring the bottom bracket remains stable in the frame, increasing bearing life, and simplifying maintenance. This means no more creaking, smoother operation, longer bearing life, and really quick bearing replacement. Note: Use only bottom bracket tools compatible with 16-notch, 48.5mm outer diameter cups. - Bearings: Enduro ABEC-3 - Color: Black - Bottom Bracket/Frame Interface: BB86, BB92 - Bottom Bracket Shell Width (mm): 86mm, 92mm, 89.5mm - Bottom Bracket Shell I.D.: 41mm - Crank Spindle Type: Shimano Hollowtech II, FSA MegaExo, RaceFace EXI - Crank Spindle Diameter: 24mm - Weight: 106g
$3.95
- Protects cranks from damage caused by overtightening pedals - Can be used for bike fit adjustments, Dependent on pedal thread length engagement
$15.50
Aluminum headset stack spacers precision cut to ensure proper headset function.
- Precision cut for proper function
$3.99
Aluminum headset stack spacers precision cut to ensure proper headset function.
- Precision cut for proper function
$18.99
Aluminum headset stack spacers precision cut to ensure proper headset function.
- Precision cut for proper function
$7.99
Carbon fiber headset stack spacers, precision cut to ensure proper headset function.
- Compatible with all threadless and threaded headsets
$7.99
Carbon fiber headset stack spacers, precision cut to ensure proper headset function.
- Compatible with all threadless and threaded headsets
$7.99
Carbon fiber headset stack spacers, precision cut to ensure proper headset function.
- Compatible with all threadless and threaded headsets
Page 1 of 254
Next page